Epoxy resin LP 2410 (No UV) (A) + hardener HP 2436 (B) - Surface Coat

Crystal clear 2K epoxy resin LP 2410 surface coating of almost all materials in one Layer height of 1-3mm; The epoxy resin does not offer any UV resistance, please use one of our topcoats to protect against UV rays and scratches. The epoxy resin is colorless, free of organic solvents, odorless and does not release any toxic fumes.

Applications

Surface coatings of almost all materials, coatings from 1-3mm.

mixing ratio

The Epoxy Resin LP 2410 (no UV) (A) must be mixed with the Hardener HP 2436 (B) in a weight ratio of 100: 60.

application

The processing temperature is between 15-30ºC, ideal is a temperature of 23ºC and humidity between 60-70%.

The gel time (100g) at 23 ° C is approx. 35-45 minutes

The gel time (coating of 1mm) at 23ºC is approx. 2-3 hours.

Hardening / heat resistance / hardness

The system was developed to cure completely in a temperature range between 10-30ºC, it achieves a heat resistance between 50-60ºC and a Shore D hardness of 82.

The heat resistance can be increased to up to 100 ° C by adding heat during the curing process.

Storage

The epoxy resin can also be stored in a sealed container and under favorable storage conditions for a period of 12 months without this leading to a reduction in utility value. The product should be stored between 10-30ºC and not exposed to direct sunlight.

Technical data sheet

Im Technical data sheet you will find further important details.